Because I've found no guide anywhere on the internet, I'll post my findings here for other People like me.
If you want to change a phase for an area in game for specific quests or all time, you have to use the following spells in cooperation with the spell_area table.
Phase - Spell - Spellname
2 - 59073 - "Phase - Quest Zone-Specific 01"
4 - 78318 - "Phase - Quest Zone-Specific 02"
8 - 59087 - "Phase - Quest Zone-Specific 03"
1024 - 67789 - "Phase - Quest Zone-Specific 04"
2048 - 68480 - "Phase - Quest Zone-Specific 05"
4096 - 68481 - "Phase - Quest Zone-Specific 06"
8192 - 68482 - "Phase - Quest Zone-Specific 07"
16384 - 68483 - "Phase - Quest Zone-Specific 08"
32768 - 69077 - "Phase - Quest Zone-Specific 09"
65536 - 69078 - "Phase - Quest Zone-Specific 10"
131072 - 69484 - "Phase - Quest Zone-Specific 11"
262144 - 69485 - "Phase - Quest Zone-Specific 12"
524288 - 69486 - "Phase - Quest Zone-Specific 13"
1048576 - 70695 - "Phase - Quest Zone-Specific 14"
2097152 - 70696 - "Phase - Quest Zone-Specific 15"
4194304 - 74093 - "Phase - Quest Zone-Specific 16"
8388608 - 74094 - "Phase - Quest Zone-Specific 17"
16777216 - 74095 - "Phase - Quest Zone-Specific 18"
33554432 - 74096 - "Phase - Quest Zone-Specific 19"
67108864 - 74097 - "Phase - Quest Zone-Specific 20"
assign via spell_area >>> for specific area
spell = Spell
area = (ZoneID/AreaID)
quest_start = 0
quest_end = 0
aura_spell = 0
racemask = 0
gender = 2
autocast(flags) = 1
quest_start_status = 64
quest_end_status = 116
assign via spell_area >>> for specific quest(s) on area
spell = Spell
area = (ZoneID/AreaID)
quest_start = questid wich starts the phasechange on accept
quest_end = questid wich ends the phasechange on fail or objective fulfill (can be the same as quest_start)
aura_spell = 0
racemask = 0
gender = 2
autocast(flags) = 1
quest_start_status = 8
quest_end_status = 34
These spells are working with patch 5.4.8. If you want multiple quest per phase change, the queststarter/questender NPCs have to exist in this phase too.
Addition: If you want Creatures/Objects in multiple phases, you can add the phases together.
If you set the phase of an NPC to phase 3, the NPC is visible in phase 1 and 2.
If you want to change a phase for an area in game for specific quests or all time, you have to use the following spells in cooperation with the spell_area table.
Phase - Spell - Spellname
2 - 59073 - "Phase - Quest Zone-Specific 01"
4 - 78318 - "Phase - Quest Zone-Specific 02"
8 - 59087 - "Phase - Quest Zone-Specific 03"
1024 - 67789 - "Phase - Quest Zone-Specific 04"
2048 - 68480 - "Phase - Quest Zone-Specific 05"
4096 - 68481 - "Phase - Quest Zone-Specific 06"
8192 - 68482 - "Phase - Quest Zone-Specific 07"
16384 - 68483 - "Phase - Quest Zone-Specific 08"
32768 - 69077 - "Phase - Quest Zone-Specific 09"
65536 - 69078 - "Phase - Quest Zone-Specific 10"
131072 - 69484 - "Phase - Quest Zone-Specific 11"
262144 - 69485 - "Phase - Quest Zone-Specific 12"
524288 - 69486 - "Phase - Quest Zone-Specific 13"
1048576 - 70695 - "Phase - Quest Zone-Specific 14"
2097152 - 70696 - "Phase - Quest Zone-Specific 15"
4194304 - 74093 - "Phase - Quest Zone-Specific 16"
8388608 - 74094 - "Phase - Quest Zone-Specific 17"
16777216 - 74095 - "Phase - Quest Zone-Specific 18"
33554432 - 74096 - "Phase - Quest Zone-Specific 19"
67108864 - 74097 - "Phase - Quest Zone-Specific 20"
assign via spell_area >>> for specific area
spell = Spell
area = (ZoneID/AreaID)
quest_start = 0
quest_end = 0
aura_spell = 0
racemask = 0
gender = 2
autocast(flags) = 1
quest_start_status = 64
quest_end_status = 116
assign via spell_area >>> for specific quest(s) on area
spell = Spell
area = (ZoneID/AreaID)
quest_start = questid wich starts the phasechange on accept
quest_end = questid wich ends the phasechange on fail or objective fulfill (can be the same as quest_start)
aura_spell = 0
racemask = 0
gender = 2
autocast(flags) = 1
quest_start_status = 8
quest_end_status = 34
These spells are working with patch 5.4.8. If you want multiple quest per phase change, the queststarter/questender NPCs have to exist in this phase too.
Addition: If you want Creatures/Objects in multiple phases, you can add the phases together.
If you set the phase of an NPC to phase 3, the NPC is visible in phase 1 and 2.
Last edited:
