A General Help Guide
Close

User Tag List

Page 1 of 3 123 LastLast
Results 1 to 10 of 23
  1. #1
    Cotton Candy Randy Mr. Satan's Avatar
    Join Date
    Apr 2016
    Location
    World Martial Arts Championships
    Posts
    867
    Mentioned
    17 Post(s)
    Tagged
    0 Thread(s)

    Question A General Help Guide

    Intro:
    So I see a lot of frequently asked questions, and while I've answered a few of them in time for the poster to see them, other people find a problem with the repack, then leave and are never seen again, thinking the problem was the repack itself, when it really wasn't (most of the time).

    I'm making this "guide" to help anyone who has any questions about the repack that aren't specifically answered. Hopefully you've found this thread *before* pulling your hair out over a problem you just can't fix, and maybe this thread can help prevent this.

    To start, I am no expert at any of this, so if I get something wrong, or if I'm unable to answer a question, I appologize. If I come accross a problem that I do not know how to solve, I will look into it myself among various other WoW private server websites, or just plain extensive google searching. Also, I want to say that this guide isn't really for answering questions like "What is an IP" and whatnot, as I'd like to cover the harder questions first, however feel free to ask any question in this thread, and I'll try to answer it.
    ---------------------------------------------------------------------------------------
    Helpful Links:
    First, there are some links I figure you need to see before we continue, and they might answer your questions before they even need to be asked;
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] by [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] has already made a very helpful guide for understanding some of the things you may see in a repack, such as mmaps, vmaps, MySQL, etc. You don't really need this information if you're just planning to set up your repack and go, but if you're looking to do anything beyond that, than this will help you get a good understanding of what you're looking at.

    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    -both by our forum [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]. These will help you set up your repack public, so you can get your friends to play with you. There may be some future questions about this as sometimes, something goes wrong and it just wont work. Whatever happened, it's most likely a simple error like using the wrong IP, forgetting to put a period in said IP, etc. Remember, feel free to ask any question you may have that you feel hasn't been properly answered, or asked at all!

    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] by [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    This thread is very helpful, as many people have had the problem of not being able to connect to their realm, yet they can log in. So far, most people who've had the problem was able to fix it using Lingx's solution.

    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] by [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    This isn't really a guide on fixing the issue, but more of a "where to look" to fix it. Vazz had a problem where his mouse would move all over the place in the World of Warcraft client, even though the mouse sensitivy wasn't the problem. Vazz's last post in the thread I linked to describes where he went to fix his problem.

    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    This site is really great, as it provides all of the commands for TrinityCore, which I believe this repack uses.
    To get ID's for objects, npcs, items, etc, use one of these commands:
    Code:
    .lookup creature $NPCName
    .lookup item $ItemName
    .lookup object $ObjectName
    Note that some items, objects, and npcs can have multiple different ID's. You'll have to check through each one to see which one is what you want.
    ---------------------------------------------------------------------------------------
    Now, in no particular order, I'm going to add any questions and answers that I see to this thread. Sorry if there isn't much organization, but in case this list gets a little too long (which it might not, depending if everyone is afraid to ask a question!), you could just use 'Ctrl+F' using your keyboard to search for whatever you're looking for.
    Q&A:
    Q: Character not being able to loot - relogging temporarily fixes but it always messes up again!
    A: I have personally experienced this, and so far have seen 1 or 2 other people go through the same problem. While the cause may be different than yours, what caused mine was using the CharImporter ([Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]) for upgrading the server. I was using v5, then I donated and got v6, so I had to take my characters from v5 and import them to v6. All of my characters worked fine, but not my Shaman. I fixed this by simply going into my MySQL database ([Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]) and finding my character in the 'characters' table, copying the row (just right click the row and click copy) and deleting the current row. I then pasted the row back into the table. I know it sounds silly, but it actually worked! If that doesn't work for you, however, take a look at the 'guid' of the character, then delete the row. Then, go in game and re-create the character, use commands to level you up, and then go into the database and set your new character's guid to the previous one. I believe this will match up the inventories and bank items, and maybe even spells.
    ---------------------------------------------------------------------------------------
    Q:How can I update the repack? I don't want to lose my characters!
    A:To update, use the [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]. It allows you to import characters from one server to another. I have personally used it to bring my characters from v4 to v5, then v6, and now v6.1, so I guarentee it works, at least for this repack. I prefer to use the template option, it seems safer and easier that way. As for a tutorial on how to use it, sadly I don't know if there is one. If you need help using it though, feel free to ask, and I'll help as best as I can!
    ---------------------------------------------------------------------------------------
    Q: (For those who haven't used HeidiSQL or similar programs) I can't see all the rows in the database? All I see is a very limited amount of items, gameobjects, etc?
    A: This is a simple question, but I've seen it once or twice and I felt it could get a quick answer. All you have to do is click the 'Show All' button in the top right corner of the data. It might take a second (or minute) to load, but it will then load every item in the table, then click 'entry' once to sort by the item entry id.
    ---------------------------------------------------------------------------------------
    Q: Can't add a custom item into the database? It tells me a field item doesn't exist?
    A: I'm assuming a lot of people still use wow-v for adding items into their server, and I'm not sure if they don't support trinity-core, or of this repack if slightly different from a normal trinity-core repack (or both). I've copied an insert from my database to build somewhat of a 'template' for adding items into this repack.
    Code:
    INSERT INTO `item_template` (`entry`, `class`, `subclass`, `SoundOverrideSubclass`, `name`, `displayid`, `Quality`, `Flags`, `FlagsExtra`, `Unk430_1`, `Unk430_2`, `BuyCount`, `BuyPrice`, `SellPrice`, `InventoryType`, `AllowableClass`, `AllowableRace`, `ItemLevel`, `RequiredLevel`, `RequiredSkill`, `RequiredSkillRank`, `requiredspell`, `requiredhonorrank`, `RequiredCityRank`, `RequiredReputationFaction`, `RequiredReputationRank`, `maxcount`, `stackable`, `ContainerSlots`, `stat_type1`, `stat_value1`, `stat_unk1_1`, `stat_unk2_1`, `stat_type2`, `stat_value2`, `stat_unk1_2`, `stat_unk2_2`, `stat_type3`, `stat_value3`, `stat_unk1_3`, `stat_unk2_3`, `stat_type4`, `stat_value4`, `stat_unk1_4`, `stat_unk2_4`, `stat_type5`, `stat_value5`, `stat_unk1_5`, `stat_unk2_5`, `stat_type6`, `stat_value6`, `stat_unk1_6`, `stat_unk2_6`, `stat_type7`, `stat_value7`, `stat_unk1_7`, `stat_unk2_7`, `stat_type8`, `stat_value8`, `stat_unk1_8`, `stat_unk2_8`, `stat_type9`, `stat_value9`, `stat_unk1_9`, `stat_unk2_9`, `stat_type10`, `stat_value10`, `stat_unk1_10`, `stat_unk2_10`, `ScalingStatDistribution`, `DamageType`, `delay`, `RangedModRange`, `spellid_1`, `spelltrigger_1`, `spellcharges_1`, `spellcooldown_1`, `spellcategory_1`, `spellcategorycooldown_1`, `spellid_2`, `spelltrigger_2`, `spellcharges_2`, `spellcooldown_2`, `spellcategory_2`, `spellcategorycooldown_2`, `spellid_3`, `spelltrigger_3`, `spellcharges_3`, `spellcooldown_3`, `spellcategory_3`, `spellcategorycooldown_3`, `spellid_4`, `spelltrigger_4`, `spellcharges_4`, `spellcooldown_4`, `spellcategory_4`, `spellcategorycooldown_4`, `spellid_5`, `spelltrigger_5`, `spellcharges_5`, `spellcooldown_5`, `spellcategory_5`, `spellcategorycooldown_5`, `bonding`, `description`, `PageText`, `LanguageID`, `PageMaterial`, `startquest`, `lockid`, `Material`, `sheath`, `RandomProperty`, `RandomSuffix`, `itemset`, `MaxDurability`, `area`, `Map`, `BagFamily`, `TotemCategory`, `socketColor_1`, `socketContent_1`, `socketColor_2`, `socketContent_2`, `socketColor_3`, `socketContent_3`, `socketBonus`, `GemProperties`, `ArmorDamageModifier`, `duration`, `ItemLimitCategory`, `HolidayId`, `StatScalingFactor`, `CurrencySubstitutionId`, `CurrencySubstitutionCount`, `flagsCustom`, `WDBVerified`) VALUES (ENTRY-ID, CLASS, SUBCLASS, -1, 'ITEM-NAME', DISPLAY-ID, QUALITY, 0, 8192, 1.0428, 1, 1, BUY-PRICE, SELL-PRICE, INVENTORY-TYPE, ALLOWED-CLASS, ALLOWED-RACE, ITEM-LEVEL, REQUIRED-LEVEL, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 500, 0, 7, 0, 100, -1, 0, -1, 0, 0, 1000, -1, 0, -1, 0, 0, 0, -1, 0, -1, 0, 0, 0, -1, 0, -1, 0, 0, 0, -1, 0, -1, 1, '', 0, 0, 0, 0, 0, 6, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 15595);
    I'd suggest copying and pasting this code into notepad or something similar, and looking through and changing what needs to be changed. I replaced the values of the generally important fields with text, for example: For buy price, the item I used was originally 3, but I changed it to 'BUY-PRICE' for your convenience of editing. Remember, it counts as 'ggsscc' (g = gold, s = silver, c = copper). If you wanted to make it worth 100 gold 56 silver and 97 copper, you would set this to: 1005697
    ---------------------------------------------------------------------------------------
    Q: What about Auction-House Bot (AHBot)? Does this repack have it? And how can I use it?
    A: This repack (v5 and up) does, in fact, have AHBot implemented into it! To turn it on, or modify it, go into your worldserver.conf file and look for (Ctrl+F) 'AHBot' or 'Auction' or anything like that to see the settings. It can be a little confusing at first, and I wish I had a guide for it, but I do not fully understand it myself and I personally don't use it. If it's requested though, I'll try my best to find a proper tutorial on getting it to work. I would find one at the time of writing this, but it's a bit late at night, so I'm sorry about that. But of course, feel free to ask for how it works, and I'll try my best to answer! Or, if you'd like to know my alternate method to AHBot (it's not the best method, but it works), then just ask and I'll try to explain it.
    ---------------------------------------------------------------------------------------
    Q: My worldserver.exe keeps crashing? I don't know what's wrong?
    A: My guess is that you don't have your maps, vmaps, dbc, and mmaps folders, or at least not set up properly.
    (SCREENSHOTS NEED TO BE UPDATED)Here is a screenshot of my main repack folder, here is a screenshot of my MySQL folder, and here is a screenshot of my Core folder. Notice, my Core folder might have some things you don't, and that's fine, as long as you have the maps, vmaps, mmaps, and dbc folders there, along with the authserver.exe/conf and worldserver.exe/conf, then you're golden.
    A: While the above might work, sometimes it doesn't, and you need to know what the worldserver 'thinks' is the problem. So, to do this, try running the worldserver.exe as an admin, and it should help you find out the error. If not, there should be a way to enable a 'Crashes' folder, like you see in my Core folder, but that's either in the current VIP version, or I somehow enabled it and completely forgot. However, usually the problem is the first answer to this question, and even if it's all set up, the worldserver thinks it isn't. It could be a corrupted file, so try redownloading the maps, vmaps, mmaps, and dbs files, and if it still doesn't work, try redownloading the repack and see if that helps. If I find another fix for this, I will add it.
    ---------------------------------------------------------------------------------------
    Q:How do I create an account/set my account as a GM?
    A:This question is asked so often, that I can't believe I forgot to have it in here originally. I understand that some people don't like to use the default admin login, even if you're just hosting a server locally. I'm one of those people, myself, so I also wanted to know the command to create an account, and make myself a GM.
    First, when your worldserver.exe is open, type this into it
    Code:
    .account create $Accountname $Password
    Replace $Accountname with the name of your account, and $Password with the password you want to use to login.

    Now, you have your own account, but you can't do any commands, and you're just a normal player. While some people may prefer this, so they wont be tempted to cheat, others may want to be a GM for a number of reasons. So here is the command for that; Just type this into the worldserver.exe file like the previous command:
    Code:
    .account set gmlevel $AccountName 3 -1
    Replace $AccountName with your account that you want to be a GM. Explaining what the '3' and the '-1' mean isn't really necessary for the basics, so I wont go into detail about them. The '3' means the GM level, and the -1 means you are a GM on all realms. Replace it with the realm id if you have multiple realms if you only want someone to be a GM on that specific realm.
    ---------------------------------------------------------------------------------------
    Q:How can I log into the database using HeidiSQL? What's the account info?
    A:The information is:
    Code:
    Hostname/IP: 127.0.0.1
    Port: 3306
    Username: root
    Password: ascent
    ---------------------------------------------------------------------------------------
    Q:I'm missing Ssleay32.dll and Libeay32.dll, what do I do?
    A:Here is a link to the download:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    Virus scan link, just in case you don't trust the file:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    ---------------------------------------------------------------------------------------
    Thanks to @[Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]:
    Q:Why doesn't my Worldserver.exe see my changes in worldconfig.cfg?
    A:You can fix this by removing read-only mode in the folder's permissions.
    ---------------------------------------------------------------------------------------
    Thanks to @[Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]:
    Q:How do I launch EmuCoach in Ubuntu?
    A:Follow this tutorial here:[Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    ---------------------------------------------------------------------------------------
    Thanks to @[Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]:
    Q: Character's items keep disappearing, then getting mail about items, or with different items?
    A: Thanks to Mopower, this can be answered here: [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    ---------------------------------------------------------------------------------------
    So far this is all I have at the top of my head, but I hope to add much more to this as I find questions/answers on my own, or by people asking me themselves.
    Remember, if you don't see your problem here, don't be afraid to ask! Hopefully if I'm not currently available, or if I don't know the answer, someone more knowledgable will answer you better than I could after only googling the problem.
    Last edited by Mr. Satan; 02-04-2018 at 03:23 PM. Reason: Fixed incorrect/hard-to-read text colors.
    Have a question? Look here!:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    If you're question isn't already there, feel free to [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ].

    Want to donate and get VIP Access?
    Click [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]!


    My Releases:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]

    Quick Links:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]

  2. #2
    OMGhixD's Avatar
    Join Date
    Jun 2014
    Posts
    446
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)
    Very GOOD! This is brilliant

  3. #3
    Cotton Candy Randy Mr. Satan's Avatar
    Join Date
    Apr 2016
    Location
    World Martial Arts Championships
    Posts
    867
    Mentioned
    17 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by OMGhixD View Post
    Very GOOD! This is brilliant
    Thanks, I figured it was necessary to have to help those people who don't stick around long enough for their questions to be answered, or just for everyone else in general.
    If you know any other frequent (or rare) questions, along with the answers to them, let me know and I'll most likely add it.
    Have a question? Look here!:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    If you're question isn't already there, feel free to [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ].

    Want to donate and get VIP Access?
    Click [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]!


    My Releases:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]

    Quick Links:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]

  4. #4
    justinandy1234's Avatar
    Join Date
    Jul 2016
    Posts
    31
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    so i finally found the missing dlls i needed for the auth and world server both of them open but only Auth stays open world closes soon after i open it then my 4.3.4 client i downloaded doesnt work i downloaded the fast way one from this website but it wont work know same with launcher i saved the path where all my files for game are and it doesnt work please help me

  5. #5
    Cotton Candy Randy Mr. Satan's Avatar
    Join Date
    Apr 2016
    Location
    World Martial Arts Championships
    Posts
    867
    Mentioned
    17 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by justinandy1234 View Post
    so i finally found the missing dlls i needed for the auth and world server both of them open but only Auth stays open world closes soon after i open it then my 4.3.4 client i downloaded doesnt work i downloaded the fast way one from this website but it wont work know same with launcher i saved the path where all my files for game are and it doesnt work please help me
    Sorry I took so long to reply! This post completely passed me by!
    However, I remember talking to you before on the matter, but I can't remember if the problem was fixed? Was your problem solved, and if so, what did you do to fix it so that I may add it to the guide to help other users?

    If not, then give me some more details and I'll try to help you fix the problem!
    Have a question? Look here!:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    If you're question isn't already there, feel free to [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ].

    Want to donate and get VIP Access?
    Click [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]!


    My Releases:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]

    Quick Links:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]

  6. #6
    brian8544's Avatar
    Join Date
    May 2014
    Location
    The Netherlands
    Posts
    280
    Mentioned
    7 Post(s)
    Tagged
    0 Thread(s)
    @[Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] I've helped a few people with this minor thing to take a look at, so please add:

    Q: Why doesn't my Worldserver.exe doesn't see my changes in worldconfig.cfg?
    A: You can fix this by removing read-only mode in the folder.
    Hey, are you in need of help?

    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]

  7. #7
    Cotton Candy Randy Mr. Satan's Avatar
    Join Date
    Apr 2016
    Location
    World Martial Arts Championships
    Posts
    867
    Mentioned
    17 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by brian8544 View Post
    @[Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] I've helped a few people with this minor thing to take a look at, so please add:

    Q: Why doesn't my Worldserver.exe doesn't see my changes in worldconfig.cfg?
    A: You can fix this by removing read-only mode in the folder.
    Added. Thanks!
    I'm still keeping this updated, so any more Q/A's are welcome.

    Aslo note: I will eventually purge all posts in this thread to keep it clean and also to keep it organized by splitting it up into 2 posts, maybe more later on.
    Have a question? Look here!:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    If you're question isn't already there, feel free to [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ].

    Want to donate and get VIP Access?
    Click [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]!


    My Releases:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]

    Quick Links:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]

  8. #8
    tchniq's Avatar
    Join Date
    Aug 2016
    Location
    2005
    Posts
    22
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Iroflu View Post
    Q:I'm missing Ssleay32.dll and Libeay32.dll, what do I do?
    A:Here is a link to the download:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    Virus scan link, just in case you don't trust the file:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    The real way of getting those .dlls (safer and better practice) is actually from the following directories (including the libmysql as well as people might need it):

    libmySQL.dll - C:\Program Files (x86)\MySQL\MySQL Server x.x\lib
    libeay32.dll, ssleay32.dll - C:\OpenSSL-Win32(or 64 if you have it)\bin

    Obviously, you will need OpenSSL and MySQL installed to have them, but then they are in your system ready to be copied.

    Q:How can I log into the database using HeidiSQL? What's the account info?
    A:The information is:
    Code:
    Code:
    Hostname/IP: 127.0.0.1
    Port: 3306
    Username: root
    Password: ascent
    And this would depend on your mysql username/password, not sure why the password would just be "ascent" unless you're referring to some repack/default of something .
    Last edited by tchniq; 08-05-2016 at 04:30 PM.

  9. #9
    Cotton Candy Randy Mr. Satan's Avatar
    Join Date
    Apr 2016
    Location
    World Martial Arts Championships
    Posts
    867
    Mentioned
    17 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by tchniq View Post
    The real way of getting those .dlls (safer and better practice) is actually from the following directories (including the libmysql as well as people might need it):

    libmySQL.dll - C:\Program Files (x86)\MySQL\MySQL Server x.x\lib
    libeay32.dll, ssleay32.dll - C:\OpenSSL-Win32(or 64 if you have it)\bin

    Obviously, you will need OpenSSL and MySQL installed to have them, but then they are in your system ready to be copied.


    And this would depend on your mysql username/password, not sure why the password would just be "ascent" unless you're referring to some repack/default of something .
    The general help guide is for newer users. Experienced users would most likely know all of this, or most of it, which is why I gave simple quick versions of the two .dll files, and yes, ascent is the repack default for the EmuCoach repack.
    Have a question? Look here!:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    If you're question isn't already there, feel free to [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ].

    Want to donate and get VIP Access?
    Click [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]!


    My Releases:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]

    Quick Links:
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]
    [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ] | [Only registered users can see this link. Therefor you need to register first, and hopefully we see you wanting to join our friendly community we are trying to build up. Enjoy! ]

  10. #10
    tchniq's Avatar
    Join Date
    Aug 2016
    Location
    2005
    Posts
    22
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Iroflu View Post
    The general help guide is for newer users. Experienced users would most likely know all of this, or most of it, which is why I gave simple quick versions of the two .dll files, and yes, ascent is the repack default for the EmuCoach repack.
    I don't mean to degrade the purpose of this topic but there's that quote "Give a man a fish and you feed him for a day; teach a man to fish and you feed him for a lifetime".

    Just figured as it says "General help guide" it wouldn't be a specific repack guide (which if it is, may make my suggestion to point to the dlls on the system invalid as they might not have openssl or mysql installed since it's a pre-compile, while they're required to e.g. compile Trinity on your own)

    Do as you wish

Visitors found this page by searching for:

Nobody landed on this page from a search engine, yet!
SEO Blog

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •